About Dejond

  English | Français
banner Tubtara

 

 
Home > Tubtara blind rivet nuts > Materials

Materials | Tubtara®

The Tubtara® is available from stock in steel, aluminium and stainless steel 304 & 316.
For critical bearing environments, we can also offer the following solutions to cope with most environmental conditions :

  • superior cold formed stainless A5 or A6 quality on demand,
  • several finishing options on stainless like Cadmium, ZnNi, Seal Inox®,
  • passivated stainless steel.

Available from stock:

Material

   

WNr

Aluminium

AlMg2,5

5052

3.3523

Steel

C8C

QST 34-3

1.0213

Stainless steel A2

304Cu

 

1.4567

Stainless steel A4

316Cu

 

1.4578

 

Available on request :

Material

 

WNr

Stainless steel A5

316Ti

1.4571

Stainless steel A6

904L

1.4539

 

Material specifications are always subject to modifications.


How to choose the right material ?

A proper choice of the right material and coating of the Tubtara® is very important to obtain optimal functionality during the whole life cycle, especially when environmental conditions are unknown or critical.  Influences can be chemical (in water dissolved elements), abrasive (sand), heat, friction, contact with other metals, corrosive environments etc.

Requirements & solutions :

materialsTable

Galvanic couples

The suited material choice is not always easy and all conditions should be taken into account.  The table below shows some connection guidelines for corrosion :

Galvanic Couples Tubtara

We strongly advise to do some tests in the specific application environment on beforehand. Samples are available on request.

 

back to top

Dejond NV
Terbekehofdreef 55-59
2610 Wilrijk (Antwerp)
Belgium - Europe

T +32 3 820 34 11
F +32 3 820 35 11
info@be.dejond.com

VAT BE0404.943.722
RPL Antwerp

privacy-disclaimer
general conditions

General conditions of purchase

Tubtara® blind rivet nuts
T +32 3 820 34 36
F +32 3 820 35 36
tubtara@dejond.com

Fastening systems
T +32 3 820 34 33
F +32 3 820 35 70
dfs@be.dejond.com

Metals
T +32 3 820 34 11
F +32 3 820 35 11
info@be.dejond.com

Building systems
T +32 3 820 34 43
F +32 3 820 35 43
deps@be.dejond.com

Opening hours warehouse:

Mo-Thu: 8 am till 12 pm and 1 till 4 pm
Fri: 8 am till 12 pm and 1 till 2:30 pm


Opening hours offices:

Mo-Thu: 8 till 12:30 am and 1 till 5 pm
Fri: 8 till 12:30 am and 1 till 4pm